VDIAGTOOL VD30PRO Scanner OBD2 automobile, lecteur de codes de voiture, vérification du moteur I/M, recherche des codes DTC, outil de diagnostic OBD2 pour voitures et camions, testeur de tension, mises à jour gratuites à vie

VDIAGTOOL VD30PRO Scanner OBD2 automobile, lecteur de codes de voiture, vérification du moteur I/M, recherche des codes DTC, outil de diagnostic OBD2 pour voitures et camions, testeur de tension, mises à jour gratuites à vie

VD30PRO Only Supports Emission Diagnosis. Don't Support Full Engine System diagnosis
VDIAGTOOL VD30 Pro Car Code Reader OBD2 Scanner Diagnostic Tool for Cars and Trucks Check Engine Code Reader OBD2 Scanner with Reset Live Data Freeze Frame I/M Readiness for All OBDII Vehicles One Click Smog Check

Why Choose VDIAGTOOL VD30 Pro OBD2 Scanner Diagnostic Tool Code Reader
(VD30PRO Only Supports Emission Diagnosis. Don't Support Full Engine System Diagnosis)


Turn off Check Engine Light (MIL)


The check engine light (CEL) illuminates when your vehicle's computer believes there is a problem that could affect, or is affecting your car's emissions control system. This VDIAGTOOL VD30 Pro check engine code reader brings a fast access to scan, read the car emissions-related error code (DTCs), troubleshooting to find the root causes of problems, clear the trouble code and turn off the MIL (Malfunction Indicator Light) after fixed.


4-in-1 Comprehensive Live Data and Retrieve Freeze Frame


VDIAGTOOL VD30PRO scanner code reader can read data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data, Throttle position, Engine coolant temperature, Oxygen sensor voltages, Mass air flow and ect. Display 4 PIDs simultaneously and merge them into one to compare. Retrieve freeze frame: DTCFRZF, FUELSYSA, ETC, SHRTFT1, LONGFT1, MAP, RPM, VSS, IAT....etc, which is a valuable diagnostic aid.


All 10 Modes of OBDII Tests


VDIAGTOOL VD30 Pro OBDII scanner can perform all 10 modes of OBDII tests for complete OBD2 diagnosis, including reading codes, erase codes, view live data, patented one-click smog check, freeze frame data, O2 monitor test, on-board monitor test, component test, view vehicle information, module present. VD30pro scanner is the most complete & cost-effective OBD2 code reader for home mechanics and DIYers to solve check engine light issues and daily quick checks.


Patented One-Click Smog Check & User-Friendly Design


VDIAGTOOL VD30PRO engine analyzer features patented I/M One-Click Readiness Key for quick State Emissions readiness check(smog check) and drive cycle verification. Coming with a TFT color display to show DTC definitions more clearly, a built-in speaker provides an audible indication, an LED Indicator, and a long cable, is super easy to use even if you are new to a car repair.


Read/Clear Codes and Quick DTC Definition Lookup


A Diagnostic Trouble Code (DTC) is set in a vehicle's onboard computer when a fault occurs in any monitored system. DTC codes are sent to the vehicle's instrument panel to trigger a warning light. This VDIAGTOOL VD30 Pro car check engine light scanner retrieves generic codes, manufacturer specific codes, pending codes, permanent codes and displays DTC definitions on the TFT screen, find out the root causes and clear the codes after fixed.


Battery Voltage Test


To make sure your car in a good status for diagnosis, use the VDIAGTOOL VD30 Pro battery voltage test function could check the real-time voltage of your vehicle.


Data Playback & Print


To facilitate the recording and review of historical issues with vehicles, [Review] and [Print Data] option could performs these. For printing the diagnostic data, you need connect the VD30 Pro with computer via USB cable. Then enter the VDIAGTOOL offical website to print that.


Support 8 Languages


VDIAGTOOL VD30Pro diagnostic code reader tool can support 8 languages, including English, Chinese, French, Spanish, German, Russian, Italian, Polish, which can usefully help the user overcome the problems of language and improve diagnostic efficiency.


Lifetime Software Update


VDIAGTOOL VD30 PRO car diagnostic reader comes with lifetime Free software updates via internet.

Notice: Update support is limited to a windows based device, NOT SUPPORT MAC or iOS.

 Q&A:


✅Q: Does VD30 PRO scanner perform Air Bag, ABS, Brake, Suspension diagnosis and Oil Reset or Battery Registration?


✅A: NO,this OBD2 code reader diagnostic tool can only scan the vehicle's emission related system, pinpointing the emission related fault by displaying the fault code and erasing the error code after the related problem is fixed.



✅Q: Will this VD30 PRO vehicle diagnostic code reader works with my vehicle?


✅A: It is compatible with most of the car makers sold in the US post 1996, that are OBDII compliant and come with OBDII port. Does not work with obd1 cars, battery electric vehicles, or any other vehicles that are not OBDII compliant.



✅Q: Can this code reader car diagnostic tool update software through Mac OS?


✅A: Sorry, VDIAGTOOL VD30PRO car scanner diagnostic tool works with Windows PC for lifetime software updates only( includes windows 10). Visit our websit to download the software update tool to update.



✅Q: Why every car owner needs this scanner for car?


✅A: It can read/erase codes, check PID data to find out root cause to check engine light issue and fix it yourself to save money or avoid being ripped off by dealership, check emission readiness status to get your car ready for annual smog check.




Complete 10 Modes of OBDII/EOBD Tests


➤Read Codes : VDIAGTOOL VD30 Pro engine fault code reader can access the powertrain module to pull generic codes(P0, P2, P3, and U0), manufacturer specific codes((P1, P3, and U1) and pending codes to pinpoint the fault locations that lights up the check engine light. Reading codes can be done with key on engine off or with key on engine running depending on the specific vehicle it's testing.


➤Erase Codes : Erase the DTCs when proper fix needed has been done and the fault is not longer present. Erasing the fault codes may allow the auto scanner to delete not only the codes from the vehicle's on-board computer, but also “Freeze Frame” data and manufacturer specific enhanced data.
>>>Note: Clearing codes should be performed with key on engine off (KOEO).


➤Live Data : Live Data functions allows you to view the live PID(parameter identification data) data of vehicle's computer module(s) in text, graph to check the status of various sensors. It also enables you to record manually or automatically 5 frames of live data before and several frames after a trigger event like when a DTC is set and for later data playback and review.


➤Freeze Frame Data : Freeze Frame Data allows you to view the vehicle's operating parameters at the moment a DTC is detected The parameters may include engine speed (RPM), engine coolant temperature (ECT), or vehicle speed sensor (VSS) etc. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.


➤I/M Readiness Check(Smog Check) : VD30 pro car diagnostic scanner features patented One-Click I/M readiness Status Key to check the operations of the Emission System and to make sure your vehicle is ready for the annual State Emissions Readiness Check(Smog Check).


➤O2 Monitor Test : The O2 Monitor Test function allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer. These tests are not
on-demand tests and they are done automatically with test results saved in the on-board computer's memory. 
Note: The O2 Monitor Test function is not supported by vehicles which communicate using a controller area network (CAN).


➤On-Board Monitor Test : The On-Board Monitor Test for non-CAN-equipped vehicles retrieves and displays test results for emission-related power train components and systems that are not continuously monitored.


➤Component Test : The Component Test function allows initiating a leak test(EVAP Leak Test) for the vehicle's EVAP system.


➤Vehicle Information : The Vehicle Info. function enables retrieval of Vehicle Identification No. (VIN), Calibration ID Nos. (CINs), Calibration Verification Nos. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles.


➤Module Present : The Modules Present function allows viewing of the module IDs and communication protocols for OBD2 modules in the vehicle.
Turn Off Check Engine Light (MIL)


VDIAGTOOL VD30PRO OBDII Code Reader is an enhanced car engine scanner that enables technicians, used car dealers, weekend mechanics or DIYers to check engine related fault codes, understand the definitions of the DTCs with the DTC Lookup & DTC Breaker feature, view live sensors data stream and perform various monitor tests to figure out why the check engine light(MIL) is on and be able to fix the car problems and turn off the check engine light(MIL).
Battery Voltage Test


➤Real-time Voltage Monitoring: VDIAGTOOL VD30 Pro OBD2 scanner with voltage display function can monitor the voltage status of the vehicle battery in real time, helping users determine whether the battery is operating normally and avoid startup failures or other electrical system problems caused by low voltage;


➤Prevent Battery Failure: By regularly monitoring voltage, users can detect signs of battery aging or insufficient power in advance to avoid sudden battery failure, thereby reducing the need for emergency rescue or battery replacement;


➤Extended Battery Life: By regularly testing the battery voltage, users can better control the charging and discharging of the battery, thereby extending battery life and saving the cost of battery replacement;Improving Troubleshooting Efficiency: Some faults are related to abnormalities in battery voltage, such as the vehicle failing to start or electronic equipment not working properly. The VDIAGTOOL VD30 Pro car code reader with voltage display can help quickly identify whether there is a voltage problem and shorten the diagnosis time.



One-Key Quick Check for O2 Sensor Test & I/M Readiness


VDIAGTOOL VD30PRO vehicle code reader helps Smog Check Allows retrieval and viewing of O2 sensor monitor test result for the most recently performed test from the vehicle’s on-board computer.Less oil and more performance for your vehicle!

4-in-1 Live Data Viewing, Graphing, Recording, Playback & Printing


VDIAGTOOL VD30 Pro car engine scan tool offers technicians and DIYers complete options for auto diagnostic data processing, including viewing live data stream of multiple sensors in text or graph, record the data for later review and print it out via PC to share it with customers or mechanics.

Unmatched OBDII Compatibility


VDIAGTOOL VD30 Pro universal code reader supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN and can work on almost all OBD2/EOBD/CAN Vehicles:


➤American (USA) Cars (1996-now)for Standard OBD2 Cars from 1996 to Now: for Chrysler, for Ford, for GM, for Jeep, etc.


➤European Cars (2003-now) for Standard OBD2 Cars from 2003 to Now: for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Peugeot, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for Volkswagen, for Ford, for Jaguar, etc.


➤Japanese Cars (2008-now) for Standard OBD2 Cars from 2008 to Now: for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota. etc.


➤Chinese Cars (2010-now) for Standard OBD2 Cars from 2010 to Now: for BYD, for Chery, for Geely, for Great Wall, for Karry etc.



Easy to Use


VDIAGTOOL VD30Pro obd2 scanner is specifically designed for car owners, providing an intuitive and user-friendly interface that caters to individuals with limited automotive knowledge. It effectively diagnoses the cause of the check engine light, retrieves and clears engine fault codes, deactivates the check engine light (MIL), and resets monitors.

Nom de marque

VDIAGTOOL

Prise en charge sans fil

Non

Les piles sont-elles incluses

no

Certification de tests externes

CE

Matériau

plastic

Version matérielle

NEWEST

Utiliser

Pas de télécommunication

Certification

CE

Type D'article

Autre

Taille de l'écran

2,8 Pouces

Version du logiciel

NEWEST

Origine

CN (Origine)

Référence AliExpress

1005012449449707

Les modalités de livraison, taxes, retours et garanties sont celles du vendeur sur AliExpress. Consultez la fiche et le récapitulatif avant paiement. Un délai indicatif ne constitue pas un engagement de livraison.

2 ventes indiquées par AliExpress. Cette valeur n’est pas spécifique à la France et ne représente pas un nombre d’avis.